Make a strategy before you begin.
Begin by imagining the end product, and keep in mind that you are not restricted to painting just four walls or the whole room a single colour. Consider painting a feature wall a striking colour or accentuating mouldings with a different colour or finish than the rest of the room. Also, don’t forget to check the ceiling to determine whether it needs a makeover.
Pick a colour.
A lot of time and effort is required to peruse fan decks and paint chips. When it comes to colour, it’s best to start with the basics: How warm or chilly do you want it? Neutral or oversaturated, which do you prefer? If you already have artwork or furnishings, you’ll need to think about how the shade will work with them. Pick a few hues and obtain samples—direct-to-consumer firms, like Backdrop and Clare, give you sticky swatches you can slap on the wall for a better feel of shade (plus it’ll save you a trip to the shop) after you have an idea of what you want. See how the colours change throughout the day in the space.
On many paint firms’ websites, you can upload a picture of your room and see how several colours look on the walls before deciding which one to buy. You’ll still need to test it out in the room to see how it looks in real life.
You’ll need some tools and supplies to get started.
There are a few must-haves when it comes to painting your walls, regardless of the kind of paint you choose or the state of your walls.
- Paint
- Roll of paint
- An extension pole for the paint roller.
- Tissue paper and plastic tablecloths
- Paintbrushes
- Tray for putting on paint
- Sandpaper
- A roll of masking tape
- Rags
- A putty fork
Calculate the amount of paint you’ll need.
Carl Minchew, vice president of colour innovation and design at Benjamin Moore, says the usual rule of thumb is one gallon per 400 square feet, whether you’re painting a powder room or the outside of your home. However, this is just a general guideline: Use a paint calculator like the ones given by Benjamin Moore or Pratt & Lambert, which take window and door dimensions, to obtain a more exact figure, which you’ll surely need for major jobs. Assuming two coats of paint are used for each job,
A charcoal grey wall that has to be whitewashed? If you’re moving from a dark to a light colour, you’ll probably need more paint. Carolyn Noble, colour marketing and design manager at Pratt & Lambert, notes that a darker colour foundation requires more coats of paint than a lighter hue. To cut down on the amount of coats, she suggests priming the surface with a gray-tinted primer before painting. Even though you may have heard that a glossier paint finish provides a better level of coverage, Minchew says it isn’t enough to alter the amount that is required for each gallon of paint.
https://expressrepairsdubai.com/ recommends purchasing a touch more paint if you’re painting a textured surface rather than a smooth one. Minchew recommends buying 10 percent additional paint for cabinets with complex millwork than the amount estimated.
